| Flashing On/Off LED Type |
| |
|
Example appliances this fault process
effects:
Indesit – W103UK;
W123UK;W133UK etc
Ariston – A1435UK; A1535UK; A1635UK etc
|
| |
 |
| |
|
These fault codes are for Indesit &
Ariston appliances. When the fault process
starts:
- ‘Programme Select’ Dial will click
round, continuously.
- ‘On/Off’ LED will flash from
One-to-Twelve times for a Washing Machine
and One-to-Fifteen times for a Washer Dryer,
depending on the fault.
- ‘On/Off’ LED will the pause for 8
seconds (LED status will be off)
- Step 2 & Step 3 will be repeated
continuously until appliance is unplugged.
|
| |
| On/Off LED Flashes |
Fault |
Actions |
| 1 |
Motor fault |
 | Check connections
| Motor
| Main PCB. |
| |
|
| 2 |
Motor fault |
| Check
| Tacho
| Motor harness. |
| |
|
| 3 |
Thermistor |
| Check thermistor (20K). |
|
| 4 |
Pressure Switch |
| Jammed on empty. |
|
| 5 |
Pressure Switch |
| Jammed on full
| Blocked/Faulty Pump. |
|
|
| 6 |
Programme Selector – management
error |
| Check connections
| Programme Selector
| Main PCB. |
| |
|
| 7 |
Heater Relay |
| Check heater (1800W approx 32.) |
|
| 8 |
Heater Relay |
| Check connections
| Heater
| Pressure switch
| Module Replace Main PCB &
E-prom. |
| | |
|
| 9 |
Incompatible E-prom |
| Replace Main PCB and E-prom
| If new module has been fitted
ensure that E-prom has been fitted
correctly. Match up D-cut on surface
of E-prom with module. |
|
|
| 10 |
Pressure Switch |
| Check connections
| Pressure switch to ModuleReplace
Pressure switch, Main PCB and
E-prom. |
|
|
| 11 |
Pump |
| Check pump and connections. |
|
| 12 |
Communication Error between Main PCB
and LCD Display PCB |
| Replace Both Main PCB and LCD
Display PCB, including relevantE-proms. |
|
| 13 |
Dryer Fan does not work |
| Check connections
| Dryer thermistor
| Fan Motor
| Main PCB. |
| | |
|
| 14 |
Dryer Element faulty |
| Check connections
| Element
| Main PCB. |
| |
|
| 15 |
Dryer Element Relay faulty |
| Check connections
| Main PCB
| Pressure switch
| Replace Main PCB and E-prom. |
| | |
|
| None |
Door is locked but appliance fails to
start |
| Check Connections
| Replace Motor. |
|
|
|
| |
| Note – Main
PCB and LCD Display PCB will always require new
Eproms. Ensure that ‘D’ shape cut in E-prom
matches that on the board, when fitting. If
machine is still not correct seek tech help. |
| |
| Indesit/Ariston Evolution
(2000 – 2003) Washing Machine and Washer Dryer
Error Codes with LCD Display |
| |
|
Example appliances this fault process
effects:
Indesit – WE12UK;
WE14UK;WE16UK etc
Ariston – AIB14UK; AIB16UK etc
|
| |
 |
| |
|
These fault codes are for Indesit &
Ariston Evolution appliances. Fault Codes F01 to
F12 are for washing machines; F01 to F15 are for
washer dryers.
These appliances have an LCD
Display.
Fault will be appear on LCD
Display.
|
| |
| On/Off LED Flashes |
Fault |
Actions |
| F01 |
Motor fault |
| Check connections
| Motor
| Main PCB. |
| |
|
| F02 |
Motor fault |
| Check
| Tacho
| Motor harness. |
| |
|
| F03 |
Thermistor |
| Check thermistor (20K) |
|
| F04 |
Pressure Switch |
| Jammed on empty. |
|
| F05 |
Pressure Switch |
| Jammed on full
| Blocked/Faulty Pump. |
|
|
| F06 |
Programme Selector – management
error |
| Check connections
| Programme Selector
| Main PCB. |
| |
|
| F07 |
Heater Relay |
| Check heater (1800W approx 32) |
|
| F08 |
Heater Relay |
| Check connections
| Heater
| Pressure switch
| Module Replace Main PCB &
E-prom. |
| | |
|
| F09 |
Incompatible E-prom |
| Replace Main PCB and E-prom
| If new module has been fitted
ensure that E-prom has been fitted
correctly
| Match up D-cut on surface of
E-prom with module. |
| |
|
| F10 |
Pressure Switch |
| Check connections
| Pressure switch to Module
| Replace Pressure switch, Main PCB
and E-prom. |
| |
|
| F11 |
Pump |
| Check pump and connections. |
|
| F12 |
Communication Error between Main PCB
and LCD Display PCB |
| Replace Both Main PCB and LCD
Display PCB, including relevant
E-proms. |
|
| F13 |
Dryer Fan does not work |
| Check connections
| Dryer thermistor
| Fan Motor
| Main PCB. |
| | |
|
| F14 |
Dryer Element faulty |
| Check connections
| Element
| Main PCB. |
| |
|
| F15 |
Dryer Element Relay faulty |
| Check connections
| Main PCB
| Pressure switch
| Replace Main PCB and E-prom. |
| | |
|
| None |
Door is locked but appliance fails to
start |
| Check Connections
| Replace Motor. |
|
|
| H20 |
Not Filling |
| Check water connections. |
|
|
| |
| Note – Main
PCB and LCD Display PCB will always require new
Eproms. Ensure that ‘D’ shape cut in E-prom
matches that on the board, when fitting. If
machine is still not correct seek tech help. |
| |
| Indesit/Ariston Evolution
(2003) Washing Machine and Washer Dryer Error
Codes. Displayed by Key Codes 1 - 4 |
| |
|
Example appliances this fault process
effects:
Ariston – ‘AVL’
range AVL147UK
|
| |
 |
| |
| Indesit – ‘WIL’
range e.g. WIL123UK |
| |
 |
| |
|
These fault codes are for Indesit &
Ariston Evolution appliances. Fault Codes F01 to
F12 are for washing machines; F01 to F15 are for
washer dryers.
The fault code is a sequence of flashing LEDs.
|
| |
| Key 1 |
Key 2 |
Key 3 |
Key 4 |
LED 4 |
Fault |
Actions |
| OFF |
OFF |
OFF |
ON |
OFF |
Motor fault |
| Check connections
| Motor
| Main PCB. |
| |
|
| OFF |
OFF |
ON |
OFF |
OFF |
Motor fault |
| Check
| Tacho
| Motor harness. |
| |
|
| OFF |
OFF |
ON |
ON |
OFF |
Thermistor |
| Check thermistor (20K) |
|
| OFF |
ON |
OFF |
OFF |
OFF |
Pressure Switch |
| Jammed on empty. |
|
| OFF |
ON |
OFF |
ON |
OFF |
Pressure Switch |
| Jammed on full
| Blocked/Faulty Pump. |
|
|
| OFF |
ON |
ON |
ON |
OFF |
Heater Relay |
| Check heater (1800W approx 32) |
|
| ON |
OFF |
OFF |
OFF |
OFF |
Heater Relay |
| Check connections
| Heater
| Pressure switch
| Module
| Replace Main PCB & E-prom. |
| | | |
|
| ON |
OFF |
OFF |
ON |
OFF |
Incompatible E-prom |
| Replace Main PCB and E-prom
| If new module has been fitted
ensure that E-prom has been fitted
correctly
| Match up D-cut on surface of
E-prom with module. |
| |
|
| ON |
OFF |
ON |
OFF |
ON |
Pressure Switch |
| Check connections
| Pressure switch to Module Replace
Pressure switch, Main PCB and
E-prom. |
|
|
| ON |
OFF |
ON |
ON |
OFF |
Pump |
| Check pump and connections. |
|
| ON |
ON |
OFF |
OFF |
OFF |
Communication Error between Main PCB
and LCD Display PCB |
| Replace Both Main PCB and LCD
Display PCB, including relevant
E-proms. |
|
| ON |
ON |
OFF |
ON |
OFF |
Dryer Fan does not work |
| Check connections
| Dryer thermistor
| Fan Motor
| Main PCB. |
| | |
|
| ON |
ON |
ON |
OFF |
OFF |
Dryer Element faulty |
| Check connections
| Element
| Main PCB. |
| |
|
| ON |
ON |
ON |
ON |
OFF |
Dryer Element Relay faulty |
| Check connections
| Main PCB
| Pressure switch
| Replace Main PCB and E-prom. |
| | |
|
| OFF |
OFF |
OFF |
ON |
ON |
Door Lock error |
| Check
| Door assy
| Door Lock
| Main PCB Connections. |
| | |
|
|
| |
| Note – Main
PCB will always require a new Eprom. Ensure that
‘D’ shape cut in E-prom matches that on the
board, when fitting. If machine is still not
correct seek tech help. |
| |
